Check Instructions - ROHO Smart Check Operation Manual

Personal electronic cushion security device
Table of Contents

Advertisement

Check Instructions

Perform a Check after completing Setup (Smart Setup or Optional Setup).
How to Perform a Check:
1. You should be in your usual sitting position.
2. Press the Check Button.
3. Refer to the table below.
• Perform a Check frequently, at least once a day!
• If a cover was used while setting up the cushion, the same cover must be used
during Check.
• Perform a Check when there is a significant change in altitude.
NOTE: After you perform a Check, you may choose to perform a Hand Check to become familiar with your inflation range. See the h
NOTE: You may be able to add or remove a small amount of air and still be at your cushion inflation setting. Smart Check saves your cushion
inflation setting with some room for adjustment.
Light
Status
The cushion is within the saved
inflation setting.
Light
Possible Causes
Your weight may be unevenly
distributed.
The quick disconnect is not securely
attached to the cushion.
The cushion needs more air.
The cushion or the quick disconnect
on the cushion has a slow leak.
Light
Cause
The cushion has too much air.
Smart Check by ROHO Operation Manual
Check Table
Action
No further action is required.
Action
Perform a weight shift to circulate air in the cushion, then press
the Check Button to get a new reading.
Make sure the connection is secure, then press the Check Button
to get a new reading. See t
Open the valve and add more air to the cushion (6 to 10 pumps).
Close the valve. Press the Check Button to get a new reading.
Repeat as needed.
If you are unable to make adjustments on your own,
discontinue use until assistance is available.
See TROUBLESHOOTING in the ROHO
Cushion with Sensor Ready
contact Customer Care.
Action
Open the valve and remove air from the cushion until you see the
green light. Close the valve.
If you are unable to perform this task, seek assistance.
9
Symbols and Lights for Check
Red Light
"Remove Air.
See the Check
Table."
Green Light
"Within the saved
inflation setting."
Red Light
"Action required.
See the Check
Table."
and
in this manual.
roubleShootInG
Single Compartment
®
Technology Operation Manual or
Setup
Button
Check
Button
c
G
.
heck
uIde

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Smart Check and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents