Digital Signal Processor - Pioneer Super Tuner III D AVH-P4950DVD Operation Manual

Section
04 Available accessories
Note
Storing broadcast stations with BSSM may re-
place broadcast stations you have saved using
P01 to P12.
Selecting the area group
1 Touch COUNTRY on the function menu.
2 Touch c or d to select the area group.
Touch c or d until the desired area group ap-
pears in the display.
COUNTRY 1 (CCIR channel)—COUNTRY 2
(IN channel)—COUNTRY 3 (CHN channel)—
COUNTRY 4 (U.K. channel)—COUNTRY 5
(OIRT channel)—COUNTRY 6 (AUSTRALIA
channel)—COUNTRY 7 (SAF channel)
58
En

Digital Signal Processor

Introduction of DSP adjustments
1
You can use this unit to control multi-channel
processor (e.g. DEQ-P7650), which is sold sepa-
rately.
! Some functions may differ depending on the
multi-channel processor connected to this
unit.
By carrying out the following settings/adjust-
ments in the order shown, you can create a fi-
nely-tuned sound field effortlessly.
1 Setting the speaker setting
2 Using the position selector
3 Auto TA and EQ (auto-time alignment and auto-
equalizing)
4 Adjusting the time alignment
5 Adjusting the speaker output levels using a
test tone
6 Selecting a cross-over frequency
7 Adjusting the speaker output levels
8 Adjusting 3-band parametric equalizer
1 DSP display
Shows the DSP function names.
1 Press A.MENU button to display MENU.
MENU appears on the display.
2 Touch DSP to display the DSP function
names.
The DSP function names are displayed and
operable ones are highlighted.