When Connecting With A Rear View Camera - Pioneer Super Tuner III D AVH-P5950DVD Installation Manual

Connecting the Units

When connecting with a rear view camera

When using this product with a rear view camera, automatic switching to video from a
rear view camera when the gear shift is moved to REVERSE (R) position is possible.
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY
RESULT IN INJURY OR DAMAGE.
CAUTION
•
The screen image may appear reversed.
•
The rear view camera function is to be used as an aid for backing into a tight parking spot. Do not use this
function for entertainment purposes.
•
Objects in the rear view may appear closer or more distant than they actually are.
Violet/white
Of the two lead wires connected to the back lamp, connect the
one in which the voltage changes when the gear shift is in the
REVERSE (R) position. This connection enables the unit to
sense whether the car is moving forwards or backwards.
Connection method
Note:
• It is necessary to set CAMERA POLARITY properly in SYSTEM MENU when
connecting the rear view camera.
7
ENG/MASTER 96 INST
This product
Rear view camera input
(REAR VIEW
CAMERA IN)
20 cm
10 cm
Extension lead (supplied)
1. Clamp the lead.
CAUTION
You must use a camera
which outputs mirror
reversed images.
Rear view camera
To video output
RCA cable
(sold separately)
8 m
Fuse resistor
2. Clamp firmly with
needle-nosed pliers.
<CRD4215-A> 8