HP EliteBook 8770w RAID User Manual page 27

Hide thumbs Also See for EliteBook 8770w RAID:

Table of Contents

A message displays, notifying you that the array has been created. Click the OK button.

NOTE:

The array migration continues to run in the background. The computer can be used

normally while the migration continues.

When you are notified that the array migration has completed, close all open programs, and then

restart the computer. When the computer is restarted, the operating system detects the newly-

created array and prompts you to restart the computer a second time.

After you have restarted the computer a second time, the RAID migration is complete.

NOTE:

Although the total capacity of the RAID 0 volume appears in the Console, the extra capacity

created with the addition of the secondary hard drive appears to the system as unallocated space.

After the system reboots, you must allocate the unallocated space. For Windows XP, the only option

through the operating system is to create and format a separate volume. Windows Vista and

Windows 7 contain additional capabilities that allow you to create a single RAID 0 volume. Refer to

Allocating unallocated hard drive space for an HP image on page 26

for further instructions.

Initiate RAID migration

Table of Contents