Troubleshooting Based On Information Displayed On Remote Controller - Toshiba MMY-MAP0806HT8(J)P Service Manual

8-3. Troubleshooting Based on Information Displayed on
Remote Controller
Using main remote controller (RBC-AMT32E)
(1) Checking and testing
When a problem occurs to an air conditioner, a check
code and indoor unit No. are displayed on the
display window of the remote controller.
Check codes are only displayed while the air
conditioner is in operation.
If the display has already disappeared, access
check code history by following the procedure
described below.
(2) Ckeck code history
The check code history access procedure is described below (up to four check code stored in memory).
Check code history can be accessed regardless of whether the air conditioner is in operation or shut down.
<Procedure> To be performed when system at rest
1
Invoke the SERVICE CHECK mode by pressing the
buttons simultaneously and holding for at least 4
seconds.
The letters "
"01" is displayed, indicating the error history. This is
accompanied by the indoor unit No. to which the check code
history is related and a check code.
To check other check code history items, press the
2
button to select another check code.
Check code "01" (latest)
Note: Check code history contains four items.
3
When the
restored.
REQUIREMENT
Do not push the
How to read displayed information
<7-segment display symbols>
<Corresponding alphanumerical letters>
0 1 2
AMP Air Conditioning
SERVICE CHECK" light up, and the check code
Check code "04" (oldest)
button is pushed, normal display is
button as it would erase the whole check code history of the indoor unit.
3 4 5 6 7 8
Check code
+
TEMP.
2
FILTER
RESET
9 A b C d E
− 165 −
www.ampair.co.uk | sales@ampair.co.uk
Indoor unit No. in which
check code has occurred
ON / OFF
TIMER SET FAN MODE
TIME SAVE VENT
TEST SET CL SWING/FIX UNIT LOUVER
Normal display is restored.
3 1
Steps to follow
1 2 3
F H J L P