Irig Mic Field Status Led - IK Multimedia iRig Mic Field User Manual

English
WARNING: Permanent hearing loss may occur if earbuds or headphones are used at high
volume. You can adapt over time to a higher volume of sound, which may sound normal but can
be damaging to your hearing. Set your device volume to a safe level before that happens. If you
experience ringing in your ears, reduce the volume or discontinue use of earbuds or headphones
with your device.

iRig Mic Field status LED

The multicolor LED on iRig Mic Field gives you important information about the iRig Mic Field's operating status.
Each status is indicated by a different color:
• LED is off: iRig Mic Field is not connected to any power source.
blue: iRig Mic Field is connected and in standby mode.
• LED is dark
blue: iRig Mic Field is connected and active.
• LED is bright
• LED is green: iRig Mic Field is active and the input signal is low.
• LED is orange: iRig Mic Field is active and the input signal is OK.
• LED is red: iRig Mic Field is active and the input signal is too high.
8