Status Bar Icons; Inserting The Sim Card - Zte R28 User Manual

Indicator What it means
Signal strength
Battery status
Missed call
General mode or My style
activated
Silent mode activated
Meeting profile activated
Outdoor profile activated
Call divert

Inserting the SIM card

You want a mobile phone that is sophisticated yet easy to use and here it is in your hands! Naturally you
are eager to start using it, but first you need to insert the SIM card.
Insert the SIM card as follows:
Make sure that the phone is switched off and the charger is disconnected from the phone.

Use a screw driver or a right size coin to rotate the screw of the battery cover counter clockwise

and open the unfold battery cover.
Remove the battery if it is already installed.

Hold your SIM card with the cut corner oriented as shown and then slide it into the card holder

with the gold-coloured contacts facing downward.
Install an additional microSD™ card (Optional).

Insert the battery by aligning the gold-coloured contacts with the contacts in the battery slot.

Push down the upper section of the battery until it clicks into place.


Status bar icons

Place the battery cover back and use a screw driver or a right size coin

to rotate the screw clockwise.
It is important to keep the battery cover, antenna port and
USB port cover properly closed to maintain IP67 protection
from liquid and dust.
Indicator What it means
New SMS
New MMS
Message memory full
Phone locked
Head set mode
Alarm clock is set
Roaming
Bluetooth