Zte R259 User Manual

LEGAL INFORMATION
Copyright © 2014 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced,
translated or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without
the prior written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the
right to make modifications on print errors or update
specifications without prior notice.
R259
Version No.: R1.0
Edition Time: 2014.10.15
Key Functions
Function
Headset jack Left soft key
Charger interface
Right soft key
Earpiece
Center key
4-Way Navigation
4-Way
keys and Center key
Navigation keys
Left soft key
Right soft key
Send key
End/Power key
Send key
QWERTY keyboard
End/Power key
Facebook key
QWERTY keyboard
Facebook key
Note: In this User Manual, "press a key" means to press
the key and release it immediately, while "hold a key"
means to press the key for at least two seconds and then
release it.
1
Locking and Unlocking the Keypad
Description
Performs the function indicated at
In idle screen, hold key to lock the keypad.
the left bottom of the screen.
To unlock the keypad, press the Left soft key and then press
Performs the function indicated at the
Key.
right bottom of the screen.
Locking the keypad can prevent unintentional operations on it.
You can answer an incoming call with the regular operation
Press to confirm actions and make
when the keypad is locked.
selections.
These keys (UP, DOWN, LEFT and
Status Bar Icons
RIGHT) allow for navigation through
menu options and quick access to
Indicator What it means Indicator
some function menus.
Signal strength
Press to dial a phone number or
answer a call, or view the call history
Battery status
in the standby mode.
Press to exit to the idle mode. Missed call
Hold to switch on/off the phone.
New SMS
Press to enter characters 0-9, the
alphabets from a-z and symbols.
New MMS
hold to enter facebook.
Battery
The lithium ion battery of the mobile phone can be
immediately used after unpacking.
2 3
Installing and removing the battery
1. Make sure that your phone is off and remove the battery
cover.
2. Insert the battery by aligning the metal contacts with the
contacts in the battery slot. And then push down the
upper section of the battery until it clicks into place.
To remove the battery, pull it up and remove it from the
mobile phone.
3. Replace the battery cover and close it gently until you hear a
click.
What it means
General
Silent
Alarm clock set
Remove the battery cover Push down the battery
Bluetooth
Keypad locked
Replace the battery cover Push up the battery from here
4