Sony SLV-K877PL Operating Instructions Manual page 9

Hookup 1
Antenna hookup
Make the following connections if you're using an antenna (if you don't
have cable TV).
A Use this hookup if you're using:
• VHF/UHF antenna (you get channels 2–13 and channels 14 and higher)
• UHF-only antenna (you get channels 14 and higher)
• Separate VHF and UHF antennas
VCR
VHF/UHF
IN
OUT
B Use this hookup if you're using a VHF-only antenna (you get
channels 2–13 only)
VCR
VHF/UHF
IN
OUT
If you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so that you can connect the cable to the VHF/UHF
IN connector. If you have separate cables for VHF and UHF antennas, you should use
a U/V band mixer (not supplied). For details, see page 65.
Rear of TV
VHF/UHF
A
Match the type of
connector on your
or
TV: A, B, or C.
VHF
B
UHF
or
VHF
C
UHF
Rear of TV
Match the type of
VHF/UHF
connector on your
A
TV: A, B, or C.
or
VHF
B
For connector types
B and C, no UHF
UHF
or
connection is
required.
VHF
C
UHF
Pages 9 to 11
continued
9
Getting Started