Sony SLV-K877PL Operating Instructions Manual page 65

Attaching the external
antenna connector
When using a 300-ohm twin lead cable
for a VHF/UHF antenna, use an antenna
connector (not supplied) to connect the
antenna to the VCR.
1
Loosen the screws on the antenna connector.
2
Wind the twin leads around the screws on the antenna connector.
3
Retighten the screws.
Attaching a UHF/VHF band mixer
When using both a 75-ohm coaxial cable and
a 300-ohm twin lead cable for a VHF/UHF
antenna, use a UHF/VHF band separator/
mixer (not supplied) to connect the antenna
to the VCR.
1
Loosen the screws on the mixer.
2
Wind the twin leads around the screws on the mixer.
3
Retighten the screws.
4
Connect the 75-ohm coaxial cable to the mixer.
Antenna
connector
(not supplied)
300-ohm twin
lead cable
75-ohm coaxial
cable
Additional Information
300-ohm twin
lead cable
UHF/VHF
band
separator/
mixer (not
supplied)
65