Settinguptheplayer - LG DZ9300 Owner's Manual

9
I n t r o d u c t i o n
Audio Connection to Optional Equipment
Connect the DVD
player
to
your
optional equipment
for audio
output.
Amplifier equipped
with 2-channel
analog stereo
or
Dolby
Pro
Logic
ll
/ Pro
Logic:
Connect the left and
right AUDIO OUT jacks
on
the DVD
player to
the audio left and
right
IN
jacks
on
your
amplifier, receiver,
or
stereo
system,
using
the audio cables
(A).
Amplifier equipped
with 2-channel
digital
stereo (PCM)
or
audio /
video receiver equipped with
a
multi-channel decoder (Dolby
DigitalTM, MPEG 2,
or
DTS): Connect
one
of the DVD Player's
DIGITAL AUDIO OUT jacks (COAXIAL X)
to
the
corresponding in
jack
on
your
amplifier. Use
an
optional digital (coaxial X)
audio cable.
Digital Multi-channel sound
A digital
multi-channel connection
provides
the best sound
quality.
For this you need
a
multi-channel audio
/
video receiver that
supports
one or more
of the audio formats
supported by
your DVD
player
such
as
MPEG
2, Dolby Digital
and DTS. Check the receiver manual and the
logos
on
the front of the receiver.
NOTES
?
If the audio format of the digital
output
does not match the capabilities of your
receiver, the receiver produces
a
strong,
distorted sound
or no
sound
at
all.
?
Six Channel Digital Surround Sound via
a
digital connection
can
only be
obtained if your receiver is equipped with
a
Digital Multi-channel decoder.
?T
o see
the audio format of the
current
DVD in the
on-screen
display,
press
AUDIO.
Setting up the Player (continued)
AUDIO INPUT DIGITAL INPUT
COAXIAL
Amplifier (Receiver)
Rear of DVD
player
A X