Settinguptheplayer - LG DP8821 Owner's Manual

41
Audio Connection
to Optional Equipment
Connect the DVD
player
to
your
optional equipment
for audio
output.
You must set the
A/V IN/OUT
switch to the
"A/V
OUT" mode
Amplifier equipped with 2-channel analog stereo
or
Dolby Pro Logic
ll
/ Pro
Logic:
Connect the AUDIO OUT
jacks
on
the DVD
player
to
the audio left and
right IN jacks
on
your
amplifier, receiver,
or
stereo
system,
using
the audio cables.
Amplifier equipped
with 2-channel
digital stereo (PCM)
or
audio /
video receiver
equipped
with
a
multi-channel decoder
(Dolby
DigitalTM,
MPEG
2,
or
DTS): Connect
one
of the DVD
Player's
DIGITAL AUDIO OUT jack
to
the corresponding in jack
on
your
amplifier.
Use
an
optional digital audio cable.
Digital Multi-channel sound
A digital
multi-channel connection
provides
the best sound
quality. For
this you need
a
multi-channel audio
/
video receiver that
supports one or
more
of the audio formats
supported by
your DVD
player
such
as
MPEG
2, Dolby Digital
and DTS. Check the receiver manual and the
logos
on
the front of the receiver.
NOTES
?
If the audio format of the digital
output
does
not
match the capabilities of
your
receiver, the receiver produces
a
strong,
distorted sound
or no
sound
at
all.
?
Six Channel
Digital
Surround Sound via
a
digital connection
can
only
be obtained if your receiver is equipped with
a
Digital Multi-channel
decoder.
?
To
see
the audio format of the
current
DVD in the
on-screen
display,
press AUDIO.
Setting up the
Player (continued)
R L
AUDIO INPUT DIGITAL INPUT
OPTICAL
Optical cable
(Not supplied)
Audio/
Video cable
(Supplied)
or
(Black)
C o n n e c t i o n s