Rs232 Control; Software Control - J-TECH RS232 User Manual

Operating Instruction

9. RS232 Control

9.1 Software control

Connect the 8x8 Matrix to PC with a RS232 cable, open the software on your PC. On the
COM Setting session, select the COM port according to your PC and click Connect to get
connected.
On this COM setting session, you can also change the Device name, Device name
support up to 16 characters. Save or edit your status by clicking the Edit button.
Come to Port Set session to select or switch your input sources for each output, We can
read the current status by clicking the "Status" button, or Clear our historical operating
record by clicking "Clear" button. The right down blank shows the operating history.
Picture 1
9