Display Modes; Ta Function; Activating/Deactivating The Ta Function - Pioneer DEH-P8200R Operation Manual

A Title (English) Using RDS Functions

Display Modes

This function can be used to scroll through the various display modes for Frequency,
Program Service Name and PTY Information.
• Select the desired display mode.
Each press changes the Display ...
Each press of the DISPLAY button changes the display in the following order:
PTY Information = Program Service Name = Frequency only

TA Function

The TA (Traffic Announcement standby) function lets you receive traffic announcements
automatically, no matter what source you are listening to. The TA function can be activat-
ed for a TP station (a station that broadcasts traffic information).

Activating/Deactivating the TA Function

1. Tune in a TP station.
The TP indicator "
2. Activate the TA function.
Hold for 2 seconds
The " " indicator lights, indicating that the tuner is waiting for traffic announcements.
Repeat the preceding operation when no traffic announcement is being received to deacti-
vate the TA function.
Note:
• You can also switch the TA Function ON/OFF in the Function Menu.
• The system switches back to the original source following traffic announcement reception.
• The TA function can be activated from sources other than tuner if the tuner was last set to the FM
band but not if it was last set to the AM band.
• In sources other than tuner, the tuner automatically seeks out the TP station with the strongest sig-
nal in the current area 10 seconds after the TP indicator "
seek operation, the TP indicator "
• Only TP stations are tuned in during the Seek Tuning mode when the "
• Only TP stations are stored by BSM when the "
23
" lights when the tuner is tuned to a TP station.
" flashes.)
" disappears from the display. (During
" indicator is ON.
" indicator is ON.
" "
" "