Hd Radioä Tuner; Xm Tuner - Pioneer DEH-P8300UB Owner's Manual

Section
Available accessories
03
HD Radioä tuner
This HD Radio Ready receiver is ready to receive
HD Radio broadcasts when connected to the HD
Radio tuner (e.g. GEX-P20HD), sold separately.
For details concerning operation, refer to the HD
Radio tuner's operation manual.
Basic Operations
1 2 3 4 5 6 7
9
1 TAG indicator
2 Tags transferring indicator
3 Signal reception status indicator
When digital signal is received,
played. Otherwise, is displayed.
4 Band indicator
5 5 (stereo) indicator
6 LOC indicator
Appears when local seek tuning is on.
7 Preset number indicator
8 Signal level indicator
9 Frequency indicator
18
En
Selecting a band
1 Press BAND/ESC until the desired band (FM-
1, FM-2, FM-3 for FM or AM) is displayed.
Manual tuning (step by step)
1 Push M.C. left or right.
Seeking
1 Push and hold M.C. left or right.
You can cancel seek tuning by pushing M.C.
8 left or right.
While pushing and holding M.C. left or right,
you can skip stations. Seek tuning starts as
soon as you release M.C.
Storing and recalling stations
for each band
Operations are the same as those of the tuner.
(Refer to Storing and recalling stations for each
band on page 5.)
is dis-
Switching the display
Desired information can be displayed while tag
information has been broadcasting.
Selecting the desired text information
1 Press DISP/
/SCRL.
Broadcast frequency/station name—broad-
cast frequency/artist name—broadcast fre-
quency/song title—broadcast frequency/
program type
Scrolling the text information to the left
1 Press and hold DISP/
/SCRL.
Using iTunes tagging
The operation is the same as that of the tuner.
(Refer to Using iTunes tagging on page 6.)
Available accessories
Advanced operations using
special buttons
The operation is the same as that of the tuner.
(Refer to Advanced operations using special but-
tons on page 6.)
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
BSM (best stations memory)
Refer to BSM (best stations memory) on page 6.
Local (local seek tuning)
Refer to Local (local seek tuning) on page 6.
Seek mode (seek mode)
Seek tuning setting can be changed between digi-
tal station seek (Seek HD) and analog station seek
(Seek ALL) depending on the reception status.
1 Press M.C. to select your favorite setting.
Seek ALL—Seek HD
Blending (reception mode)
If a digital broadcast reception condition gets
poor, this unit automatically switches to the ana-
log broadcast of the same frequency level. If this
function is set to on, the tuner switches between
digital broadcast and analog broadcast automati-
cally. If this function is off, reception will be con-
ducted within an analog broadcast.
1 Press M.C. to turn this function on or off.

XM tuner

You can use this unit to control an XM satellite
digital tuner (GEX-P920XM), which is sold sepa-
rately.
! With this unit, you can operate two additional
functions: XM channel direct selection and
preset channel list.
For details concerning operation, refer to the XM
tuner's operation manuals. This section pro-
vides information on XM operations with this
unit which differs from that described in the XM
tuner's operation manual.
Basic operations
1 2 3 4
5
1 XM band indicator
2 XM channel number indicator
3 XM preset number indicator
4 XM channel select setting indicator
Shows what channel select setting has been
selected. CH is displayed when
Channel number is selected, and CAT is dis-
played when Category is selected.
5 XM text information
Shows the text information of broadcast
channel.