Before Calling Your After Sales Service - Russell Hobbs RH115 Instruction Manual

BEFORE CALLING YOUR AFTER SALES SERVICE

If your appliance is not working properly, it may be a minor problem, therefore check the
following, before calling an electrician to save time and money.
What to do if your appliance does not operate;
Check that;
1 There is no power
2 The general switch in your home is disconnected
3 The thermostat setting is on« 0 »position
4 The socket is not sufficient. To check this, plug in another appliance that you know
which is working into the same socket.
What to do if your appliance performs poorly;
Check that;
1 You have not overloaded the appliance
2 The freezer thermostat settings is in the "1" position(if so set the thermostat dial
suitable value)
3 The doors are closed perfectly
4 There is no dust on the condenser
5 There is enough place at the rear and side walls.
If there is noise;
1 The cooling gas which circulates in the cooling circuit may make a slight noise
(bubbling sound) even when the compressor is not running. Do not worry this is
quite normal. If these sounds are different check that;
2 The appliance is well levelled
3 Nothing is touching the rear
4 Anything that is on the front, sides or top of the unit are not vibrating.
Recommendations
• If the appliance is not used for long time (for example during the summer holidays)
unplug and clean the appliance and leave the door open to prevent the formation of
mildew and oudor.
• To stop the appliance completely, unplug from main socket (for cleaning and when
the doors are left open)
- 13 -