Table of Contents
Advertisement
Quick Links
LOW MOISTURE
POLISHER/SCRUBBER
INTRODUCTION
This operator's book has important information for the
use and safe operation of this machine. Read this book
carefully before starting the machine. Keep this book
and tell all operators to read the book. If you do not
follow the instructions, you can cause an injury or dam-
age equipment, furniture or buildings.
For new books write to:
Pacific Floor Care
2259 South Sheridan Road
Muskegon, MI 49442
Carefully inspect all components to ensure that there is
no concealed freight damage. If such damage is dis-
covered, file a "CONCEALED DAMAGE REPORT" im-
mediately with the delivering carrier.
SEARAY
READ THIS BOOK
OPERATING & MAINTENANCE
INSTRUCTIONS
The contents of this manual are based on the latest
product information available at the time of publica-
tion. Pacific reserves the right to make changes or
improvements to its machines without notice.
FOR YOUR CONVENIENCE, RECORD THE MACHINE
MODEL AND SERIAL NUMBER:
MODEL_______________________________
SERIAL NUMBER_______________________
PART NUMBER_________________________
DATE PURCHASED_____________________
Advertisement
Table of Contents
Related Manuals for Pacific SEARAY LOW MOISTURE
Summary of Contents for Pacific SEARAY LOW MOISTURE
- Page 1 Keep this book tion. Pacific reserves the right to make changes or and tell all operators to read the book. If you do not improvements to its machines without notice.
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS To assure the safe operation of this machine, you must read and understand all warnings and instructions in this book. If you do not understand, ask your supervisor. READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE WARNING : To reduce the risk of fire, electric shock, or injury: 1. -
Page 3: Operating Procedures
OPERATING PROCEDURES WARNING! For the safe operation of this machine Then check to make sure that the solution tank valve (lo- follow the instructions given in this manual and the cated at the bottom of the solution tank) is open. The training given by your supervisor. - Page 4 Searay Low Moisture Polisher/Scrubber...
- Page 5 SeaRay Low Moisture Polisher/Scrubber Parts List ITEM PART NO. DESCRIPTION QTY. 504810 Interlock Assembly w/Nut 506318 Label, Interlock Assembly 962011 Screw, 10-32 x 1 3/4 Oval 486407CA Cover, Switch Box w/Hole 962002 Screw, 10-32 x 1/2 Oval 980018 Washer, #10 C-Sunk Ext.
- Page 6 Solution Assembly SeaRay Low Moisture Polisher/Scrubber S626P Strainer 911554 Momentary Switch 908009 Cord-Pump to 244112 Hose- Switch Polyspring 1.5ft 478602 Tank-4 Gallon 960052 U-Bolt (2) 980004 Washer (4) 483303 Quick 483302 Quick 920004 Nut (4) Disconnect Fitting Disconnect Fitting 489403 Valve...
-
Page 7: Wiring Diagram
AC Motor Illustration & Parts Listing ITEM PART NO. DESCRIPTION QTY. 505251 Motor & Gear Asm., 1.5HP 115V 60CY Ring Gear Housing 902007 Bearing Planet Gear Hsing,10:1-3 Idler 902005 Bearing 960016 Screw 960017 Screw Motor Cord 911305 Run Capacitor 502351 Cover, Run Capacitor 502351 Cover, Start Capacitor... -
Page 8: Limited Warranty
The inoperative machine or warranted parts must be delivered to the authorized service center with shipping and delivery charges prepaid. If unable to locate a service center, you may contact Pacific at the address listed herein for the location of the nearest repair center or agent or for other instructions pertaining to your warranty difficulty.