Pioneer DEH-1500RXU/EW Service Manual page 51

5
- Removing the Pickup Unit
1. Set the mechanism to the clamp mode.
2. Remove the lead wires from the inner holder.
3. Remove the two washers, styling holder, change
arm, and pickup lock arm.
4. While releasing from the hook of the inner holder,
lift the end of the feed screw.
Caution: In assembling, move the planet gear to the
load/eject position before setting the feed screw
in the inner holder.
- Removing the Load Carriage Motor Assy
1. Release the leads from the styling holder and
remove the holder.
2. Remove the two screws.
3. Remove the load carriage motor Assy.
5
6
Styling Holder
Styling Holder
DEH-1500R/XU/EW
6
7
Washer
Pickup Lock Arm
Feed Screw
Inner Holder
Planet Gear
Load Carriage
Motor Assy
7
8
A
Change
Arm
B
C
D
E
F
51
8