Display Indication; Basic Operations; Power On/Off; Selecting A Source - Pioneer DEH-1100MP Owner's Manual

Operating this unit
g SOURCE button
Press to cycle through all the available
sources. Press and hold to turn the source
off.
h PAUSE button
Press to turn pause on or off.

Display indication

1
3
1 Main display section
Shows the various information such as
band, play time, and other setting.

! Tuner

Band and frequency are displayed.
! Built-in CD Player
Elapsed playback time and literal infor-
mation are displayed.
2 Preset number/track number indicator
Shows the track number or preset number.
! If a track number 100 or more is selected,
d on the left of the track number indica-
tor will light.
3 MP3/WMA indicator
Shows the type of the currently playing disc.
4 RPT indicator
Shows when repeat play is turned on.
5 LOUD indicator
Appears when loudness is on.
6 5 (stereo) indicator
Appears when the selected frequency is
being broadcast in stereo.
7 LOC indicator
Appears when local seek tuning is on.
2
4 5 6 7

Basic Operations

Power ON/OFF

Turning the unit on
% Press SOURCE to turn the unit on.
Turning the unit off
% Press SOURCE and hold until the unit
turns off.

Selecting a source

You can select a source you want to listen to.
% Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources.
Tuner—Built-in CD player—AUX
Notes
! In the following cases, the sound source will
not change.
— When there is no disc in the unit.
— When AUX (auxiliary input) is set to off
(refer to page 12).
! AUX is set to on by default. Turn off the AUX
when not in use (refer to Switching the auxili-
ary setting on page 12).
! When this unit's blue/white lead is connected
to the vehicle's auto-antenna relay control
terminal, the vehicle's antenna extends when
this unit's source is turned on. To retract the
antenna, turn the source off.

Adjusting the volume

% Turn VOLUME to adjust the sound level.
Tuner

Listening to the radio

1 Press SOURCE to select the tuner.
Section
02
7
En