Table of Contents
Advertisement
2-1
~9_8_76_0_E_n_vi_ro_n_m_e_n_t_allI_n_st_all_a_ti_·
0_0/---, I
cha2Pt~
I
_
Preventive Maintenance
Environmental Range
Operating Temperature:
Storage Temperature:
Ambient Humidity:
Size/Weight
Height:
Width:
Depth:
Net Weight:
Power Requirements
Ac Line Voltage:
Line Frequency Range:
Power Consumption:
Environmental
+
10°C to
+
40°C
- 40°C to
+
75°C
20 to 80%
25cm
42cm
48cm
22.2 kg
110 Vac (90 to 125 Vac)
220 Vac (198 to 250 Vac)
48 to 66 Hz
130 watts maximum
Installation
CAUTION
ENSURE THAT MAINFRAME POWER IS OFF BEFORE INSTALL-
ING THE DISPLAY.
1. Place the display on its top and ensure that the position of the CRT refresh switch matches
the input line frequency (50 Hz or 60 Hz).
2. Pull out both locking rods at the front of the mainframe support legs until they are fully
extended.
3. Place the display on the computer so that the beveled support legs on the computer. base fit
into the grooves on the underside of the display. The two pegs on the top of the computer
base fit into the alignment holes on the display.
4. Gently push down on the top of the display to ensure proper seating and electrical connec-
tion.
5. Push in the locking rods until they are flush with the computer.
6. Ensure that the voltage selector switch on the back of the display is set for the correct ac input
voltage.
7. Ensure that the correct fuse is intalled at the back of the display (250 V, 5 A, NB; Part
Number 2110-0010).
Advertisement
Table of Contents
