Clas Ohlson 38-4871 Instruction Manual

Indoor Aerial
Art.no 38-4871 Model AN2741
Please read the entire instruction manual before using the product
and save it for future reference. We reserve the right for any
errors in text or images and any necessary changes made to
technical data. If you have any questions regarding technical
problems please contact our Customer Services.
Product description
• Built-in amplifier for VHF channels 5-12 and UHF channels
21–60.
• Good reception capabilities under favourable
reception conditions.
• Can be operated from a 5 V digital receiver, included
adaptor or a power inserter (sold separately.)
• Comes with a 1.8 m aerial lead.
Safety
Warning: This aerial is for indoor use only.
Installation
1. Screw the coaxial cable to
the aerial. Note: Usually, set-top
boxes/decoders supply indoor
aerials with power via the coaxial
cable. Check whether your
decoder can supply the aerial
with power and, if such is
the case, how it is activated via
the on-screen menu.
If the decoder cannot supply
the aerial with power, you should
use the included AC/DC mains
adaptor – plug the adaptor's DC
connector into the socket above
the coaxial connection on
the back of the aerial.
GREAT BRITAIN • customer service tel: 08545 300 9799 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk
2. Slide the aerial into the bracket.
3. Connect the coaxial cable to the ANT. IN socket on
your TV/set-top box/decoder.
SET-TOP BOX
SET-TOP BOX
Disposal
This product should be disposed of in accordance with
local regulations. If you are unsure how to proceed,
contact your local authority.
SET-TOP BOX
Technical data and functions
Reception of digital terrestrial TV signal (DVB-T) and DAB signal
Interference filter for LTE signals
Extremely low noise factor
Power supplied by DVB-T receiver (or included AC/DC adaptor)
VHF: 174–240 MHz
Reception range
UHF: 470–790 MHz
Amplifier gain VHF: 18 dB (channel 5–12)
UHF: 15 dB (channel 21–60)
Included accessories
Coaxial cable F (male) to IEC (male), 180 cm
100–240 V AC, 50 Hz / 6 V DC, 100 mA
AC/DC adaptor