Humidity Controlled Crispers - LG GM-769RC Owner's Manual

25 HOW TO USE
To reinstall a shelf —Tilt the front of the shelf
up and guide the shelf hooks into the slots at a
desired height 1 . Then, lower the front of the
shelf so that the hooks drop into the slots 2 .
1
Adjusting Shelves (Full Shelf)
To remove a shelf —Tilt up the back of the shelf
and pull the shelf out.
2
1
To reinstall a shelf — Slide the shelf into the guides
1
until it stops.
CAUTION:
Make sure that shelves are level from one side to the
other.
Make sure that the shelf stopper is completely inserted
between the wall ribs.
Make sure that hooks are inserted in the correct
position. (Left shelf to left hole, right shelf to right hole
only.)
Failure to do so may result in the shelf falling or
spilling food.
2
(on some models)
1
2
1
HUMIDITY CONTROLLED CRISPER
The crispers provide fresher tasting fruit and vegetables
by letting you easily control humidity inside the drawer.
You can control the amount of humidity in the moisture
sealed crispers by adjusting the control to any setting
between VEGETABLE and FRUIT.
VEGETABLE keeps moist air in the crisper for best
storage of fresh, leafy vegetables.
FRUIT lets moist air out of the crisper for best storage
of fruit.
Vegetable
REMOVING THE HUMIDITY CONTROLLED CRISPER
1. To remove, pull the drawer out to full extension.
2. Lift the front of the crisper up, then pull it straight out.
3. To install, slightly tilt up the front, insert the drawer into
the frame and push it back into place.
To remove the glass
1. Lift up the glass under the crisper cover.
2. Pull the glass up and out.
NOTE: Pantry drawer not shown for clarity.
Fruit Vegetable
Fruit