HPE FlexNetwork 5510 HI Series Configuration Manual page 252

Step
Configure the advertisable
4.
TLVs (in Layer 3 Ethernet
interface view
management
interface view).
Configure the advertisable
5.
TLVs (in Layer 2 aggregate
interface view).
Configure the advertisable
6.
TLVs (in Layer 3 aggregate
interface view).
Command
•
lldp
tlv-enable
port-description | system-capability
| system-description | system-name
|
[ ip-address ] } | dot1-tlv { all |
congestion-notification
port-vlan-id | link-aggregation } }
•
lldp tlv-enable { basic-tlv { all |
port-description | system-capability
| system-description | system-name
|
[ ip-address ] } | dot1-tlv { all |
link-aggregation } | dot3-tlv { all |
mac-physic
power } | med-tlv { all | capability |
inventory | power-over-ethernet |
location-id
device-type country-code { ca-type
or
ca-value }&<1-10> | elin-address
Ethernet
tel-number } } }
•
lldp agent
nearest-customer
{ basic-tlv { all | port-description |
system-capability
system-description | system-name |
management-address-tlv
[ ip-address ] } | dot1-tlv { all |
link-aggregation } }
•
lldp
tlv-enable
management-address-tlv
[ ip-address ] | port-description |
system-capability
system-description | system-name }
| dot1-tlv { all | port-vlan-id } }
•
lldp
tlv-enable
management-address-tlv
[ ip-address ] | port-description |
system-capability
system-description | system-name }
| dot1-tlv { all | port-vlan-id } }
•
lldp
{
protocol-vlan-id
vlan-name
management-vid [ mvlan-id ] }
lldp agent
nearest-customer } tlv-enable basic-tlv
{ |
all
[
ip-address
system-capability | system-description |
system-name }
243
agent nearest-customer
{ {
basic-tlv
management-address-tlv
management-address-tlv
|
max-frame-size
{
civic-address
{ nearest-nontpmr |
}
tlv-enable
agent nearest-nontpmr
{ {
basic-tlv
agent nearest-customer
{ {
basic-tlv
tlv-enable dot1-tlv
[
vlan-id
[
vlan-id
{
nearest-nontpmr
management-address-tlv
] |
port-description
Remarks
|
all
|
By default:
•
Nearest
agents
advertise all types of
LLDP TLVs
link aggregation TLV
in
|
organizationally
specific
except
policy TLVs.
•
Nearest non-TPMR
bridge
advertise no TLVs.
•
Nearest
bridge agents can
advertise
|
TLVs and
802.1
organizationally
specific TLVs (only
link aggregation
TLV).
By default:
•
Nearest non-TPMR
|
bridge
all
advertise no TLVs.
•
Nearest
|
bridge agents can
advertise
TLVs and
802.1
|
all organizationally
specific TLVs (only
port and protocol
|
VLAN ID TLV, VLAN
name TLV,
management VLAN
ID TLV).
] |
Nearest bridge agents
] |
are not supported on
Layer 2
interfaces.
By default:
•
| Nearest non-TPMR
bridge
advertise no TLVs.
|
•
Nearest
bridge agents can
advertise only basic
TLVs.
bridge
can
(only
802.1
TLVs)
network
agents
customer
basic
IEEE
agents
customer
basic
IEEE
and
aggregate
agents
customer