Related Manuals for BCS BCS-580CA
Summary of Contents for BCS BCS-580CA
- Page 1 SI'EII18H IESOLUTIOI e lLIUI e11E11 USER'S MANUAL...
- Page 2 Thanks for purchasing our product.Before operating the unit, please read the instructions carefully and keep this manual for future refe- rence. Table of Contents 1.1ntroduction----------------------------------------------1 2.Featu res--------------------------------------------------1 3.Cautions-------------------------------------------------- 4.1nstallation&Auto 1 ris connector----------------------3 5.Key---------------------------------------------------------6 6.Menu Functio ns·······----·-··-··-----------------·-··---6 7.Specifications------------------·-·-·-·-····--··-----···-16...
- Page 3 The Super High Resolution Colour Camera adopt ad.vanced D~gital 1. Before installing and operating the unit, please read the manual Signal Processor (DSP) technology, wh!ch enhances pl~ture to high carefully. quality and high resolution greatly, provides great function and more 2.
- Page 4 Figure:Auto iris connector Jack Pin Video iris lens DC iris lens Power Damp- (!J1!lt!) Null Damp+ Video signal Drive+ @AC2~'2V IRIS Ground Drive- ~r;.0~ VIDEO It will get better image quality to adjust the iris on the back board while connecting to the DC iris lens. 4.
- Page 5 Center selection button to enter a menu or exit the menu. I/O port function: •• RS232 is connect to Rs232 interface of PC(Option); Move the icon vertically between the menus and options. 1, Second PIN of RS232seriai port (Option) 2, Third PIN of Rs232serial port(Option) ••...
- Page 6 default is ON, the resolution will be540TVL, HI-RESOLUTION, it will be effective after restart while change setting. set ON, image will be crisper, has three grades: Low, SHARPNESS, Middle, High, default is OFF. Select GENERAL SET on the main menu, press left or right key to enter GENERAL MENU for normal mode setup.
-
Page 7: Day And Night
CENTER, LOWER 113,CENTER LEFT, CENTER RIGHT, UPPER 1/3. If choose the CENTER as the reference area, means the average light in the AREA 1 will be the standard. Setup way: set the BACKLIGHT MODE SET BACKLIGHT MODE SET CENTER ON, then set the dynamic period of the other four areas BACKLIGHT MODE SENS BACKLIGHT MODE... - Page 8 Night to Day: switch to Night mode while gain lower than the set value(night to day value can be set from 155-to 185 8 mask areas can be set at most, step (if want to set the first mask based on requirements).170 by default. area):set the MASK NUMBER 001;...
- Page 9 IJ'"11' Enter AE MODE menu through left or right key to set the electronic ANTI-COLOR ROLLING shutler and gain. If the AC frequency is not stable or different too much(for example, the electricity frequency is less 49.9Hz), the serious color rolling will appear, set the anti-color rolling ON, will remove or ease color rolling.
- Page 10 AI, while using auto-iris lens, setAl ON, electronic shutler will be 1/50s for PAL, 1/60s for NTSC. 1/3"SONY Super HAD CCD Image Sensor SHUTTER, set the camera's stable electronic shutler, 1I50s, Signal System PALINTSC 1/120s, 11100s, 1I250s, 1/5005, 111000s, 1I2000s,1/4000s,1/10Ks, 1/1 OOKsoptional.
Need help?
Do you have a question about the BCS-580CA and is the answer not in the manual?
Questions and answers