Initial Setup Menu; Using The Initial Setup Menu - Pioneer Elite BDP-94HD Operating Instructions Manual

Initial Setup menu

Chapter 8
Initial Setup menu

Using the Initial Setup menu

The Initial Setup menu is where you can set various player options for sound, picture, language and so on. Note that settings can only be
changed when the player is stopped.
If you disconnect the player from the wall outlet before switching the player off, any new settings made during that session will be lost.
• Press HOME MENU and select 'Initial Setup'.
In the table below, the default option is marked with a •.
Setting Options
Video Out
TV Aspect Ratio 4:3 (Standard)
16:9 (Widescreen) •
4:3 Video Out Full
Normal •
DVD 16:9 Video Out Letter Box •
Pan & Scan
Some discs contain only Letter Box or Pan & Scan presentation so the video output will depend on the disc.
HDMI Color Space YCbCr •
RGB (16–235)
RGB (0–255)
When using an HDMI monitor that accepts only RGB input, this player outputs RGB video even if this setting is set to YCbCr. If the monitor is DVI-compatible, the player
outputs RGB (0–255) color space. If however the picture looks unnatural, set it to RGB (16–235).
24p Direct Out On
Off •
When 24p Direct Out is On, you may experience some picture disturbance when the video switches between video and film material. See also Changing the output video
resolution on page 14.
Explanation
Select if you have a standard 4:3 TV. See Changing the output video resolution on page 14.
When the Output Video Resolution is set to 720p, 1080i or 1080p, video is output in 16:9 widescreen
format even if TV Aspect Ratio is set to 4:3 (Standard). When connected to a 4:3 TV, set the Output
Video Resolution to 480i or 480p. See also Changing the output video resolution on page 14.
Select if you have a widescreen 16:9 TV.
4:3 video material is output without black bars on either side of the picture if the TV Aspect Ratio
setting (above) is set to 16:9 (Widescreen).
4:3 video material is output with black bars on either side of the picture if the TV Aspect Ratio setting
(above) is set to 16:9 (Widescreen).
If the TV Aspect Ratio setting (above) is set to 4:3 (Standard), select this if you prefer letterbox
presentation of 16:9 format DVDs.
If the TV Aspect Ratio setting (above) is set to 4:3 (Standard), select this if you prefer Pan & Scan
presentation of 16:9 format DVDs.
This is the standard setting for HDMI-compatible devices.
Use this setting if colors appear overly rich and the black too deep on the RGB (0–255) setting.
Use if colors are weak and black appears to 'float' on the RGB (16–235) setting.
Gives smooth movement in BD/DVD film material video. This setting is only effective when the player
is connected to a 1080/24p-compatible TV using HDMI.
Choose this setting if you notice picture disturbance when the video switches between video and
film material.
08
41
En