Cruise Control - Chevrolet Impala 2018 Owner's Manual

182 Driving and Operating
To turn off only TCS, press and
release . The Traction Off light
displays in the instrument cluster. To
turn TCS on again, press and
release . The Traction Off light
displayed in the instrument cluster
will turn off.
If TCS is limiting wheel spin when
is pressed, the system will not turn
off until the wheels stop spinning.
To turn off both TCS and StabiliTrak,
press and hold until the Traction
Off light and StabiliTrak Off light
come on and stay on in the
instrument cluster. To turn TCS and
StabiliTrak on again, press and
release . The Traction Off light
and StabiliTrak Off light
instrument cluster turn off.
Adding accessories can affect the
vehicle performance. See
Accessories and Modifications
0 214.

Cruise Control

With cruise control, you can
maintain a speed of about 40 km/h
(25 mph) or more without keeping
your foot on the accelerator. Cruise
control does not work at speeds
below about 40 km/h (25 mph).
Cruise control can be dangerous
where you cannot drive safely at
a steady speed. Do not use
cruise control on winding roads or
in heavy traffic.
Cruise control can be dangerous
on slippery roads. On such roads,
fast changes in tire traction can
in the cause excessive wheel slip, and
you could lose control. Do not use
cruise control on slippery roads.
If equipped with the Traction Control
System (TCS), the system may
begin to limit wheel spin while you
are using cruise control. If this
happens, the cruise control will
automatically disengage.
Warning
See Traction Control/Electronic
Stability Control 0 180. If a collision
alert occurs when cruise control is
activated, cruise control is
disengaged. See Forward Collision
Alert (FCA) System 0 194. When
road conditions allow you to safely
use it again, the cruise control can
be turned back on.
If the brakes are applied, the cruise
control disengages.
: Press to turn cruise control on
or off. A white indicator comes on in
the instrument cluster when cruise
is on.