Second Row Seats; Heated And Ventilated Seats; Head Restraint Adjustment - Chevrolet Impala 2018 Owner's Manual

Before storing, adjust all available
memory feature positions. Turn the
ignition on and then press and
release SET; a beep will sound.
Then immediately press and hold 1,
2, or (Exit) on the driver door
until two beeps sound. To manually
recall these positions, press and
hold 1, 2, or until the saved
position is reached.
When Auto Memory Recall is
enabled in the personalization
menu, positions previously stored to
memory buttons 1 and 2 are
recalled when the ignition is
changed from off to on or ACC/
ACCESSORY.
When Easy Exit Options is enabled
in the personalization menu, the
feature automatically recalls the
previously stored exit position when
exiting the vehicle. See Memory
Seats 0 57.

Second Row Seats

The rear seatbacks can be folded
down to increase cargo space.
See Rear Seats 0 61.
Heated and Ventilated
Seats
Heated and Ventilated Seat
Buttons Shown, Heated Seat
Buttons Similar
If available, the buttons are on the
center console. To operate, the
ignition must be on.
: If available, press to heat the
driver or passenger seatback only.
: Press to heat the driver or
passenger seat cushion and
seatback.
In Brief
: If available, press to ventilate
the driver or passenger seat.
A ventilated seat has a fan that pulls
or pushes air through the seat. The
air is not cooled.
An indicator light on the button turns
on when the heated or ventilated
seat is on.
See Heated and Ventilated Front
Seats 0 59.
Head Restraint
Adjustment
Do not drive until the head restraints
for all occupants are installed and
adjusted properly.
To achieve a comfortable seating
position, change the seatback
recline angle as little as necessary
while keeping the seat and the head
restraint height in the proper
position.
See Head Restraints 0 51 and Seat
Adjustment 0 54.
13