JVC UX-G5 Service Manual page 10

3.1.11 Removing the Rear plate assembly
(See Fig.17 to 18)
(1) Disengage the claws I1 on both sides of bottom plate. (See
Fig.17)
(2) Disconnect the wire I2 from the connector
AMP board. (See Fig.18)
3.1.12 Removing the fan
(See Fig.19)
(1) Removing the four screws M2.
3.1.13 Removing the Tuner pack
(See Fig.19)
(1) Removing the two screws M1.
1-10 (No.MB431)
CN105 on the
I1
I2
Tuner pack
Rear plate assembly
Fig.17
Fig.18
M2
M1
M1
M2
Fig.19
M2
M2
Fan