Panasonic BT-M1950Y Service Manual page 17

Service menu entry
1.
While holding Enter depressed, press Degauss.
2. The letter S appears at the upper left of the screen.
3. While holding Enter depressed, press Menu.
4.
The screen display changes to < SERVICE MENU>
PLEASE, DON'T TOUCH!
5. Press the left [(--) or right arrow
[-'>]
to display the service
menu.
If Step 4 state continues for more than 5 seconds without
a further operation, the display extinguishes and the mode
is released.
Item selection
• While the service main menu is displayed:
1. Press the up [ j
l
or down arrow [
l ]
to select the item.
2. After selecting the item, press Enter.
3. The adjustment mode menu is displayed.
Setting value change
• While the adjustment mode menu is displayed:
1. Press the right arrow
[-'>I
to change the setting value in
the
+
direction.
2. Press the left arrow [(--] to change the setting value in the
- direction.
3. Press the up [ j
l
or down arrow [
l
l
to change the
adjustment item number.
Service menu exit
1. When settings are completed, press Menu.
2. The service main menu returns.
3. Again press Menu.
4. The screen display extinguishes and the service mode is
exited.
- 17 -
s
<SERVICE MENU>
PLEASE, DON'T TOUCH !
<SERVICE MENU>
~ SIGNAL BLOCK
WITE BALANCE BLOCK
DEFLECTION BLOCK
CONTROL BLOCK
Service main menu
SERVICE (501): 015
Adjustment mode menu
Adjustment ite number
Setting value
U I -1y1 I '1'-'V I