Hide thumbs Also See for 6650:
Table of Contents

Advertisement

device. To make calls, you must first activate the phone function by changing
profiles. If the device has been locked, enter the lock code.

Indicators

or
— The phone is connected to a UMTS or GSM network.
— HSDPA (network service) in the UMTS network is activated.
— The phone is in the offline mode and not connected to a cellular
network.
— A memory card is inserted in the phone.
— You received one or several messages to the Inbox folder in
Messaging.
— You received new e-mail in your remote mailbox.
— There are messages waiting to be sent in Outbox.
— You have missed calls.
— Ringing type is set to Silent and Message alert tone and E-mail
alert tone are set to Off.
— The phone keypad is locked.
— The loudspeaker is activated.
— An alarm is active.
— All calls to the phone are forwarded to another number.
or
— A headset or a loopset is connected to the phone.
or
or
— A GPRS packet data connection is active, the connection
is on hold, or a connection is available.
or
or
— A packet data connection is active in a part of the
network that supports EGPRS, or the connection is on hold, a connection
is available. Your phone may not use EGPRS in the data transfer.
or
or
— A UMTS packet data connection is active, the
connection is on hold, or a connection is available.
or
— Bluetooth is switched on, or data is being transmitted using
Bluetooth.
— A USB connection is active.
Model 6650d-1bH
02 April 2008
Y o u r p h o n e
21

Advertisement

Table of Contents
loading

Table of Contents