Advertisement
Sample and Hold: Sample and hold circuit with a signal input, modulation input and resulting
output. Two sample and hold circuits are available on the OS20.
Ring Mod: Ring modulator with inputs for two signals and an output for the result.
Warm: A mild distortion effect with signal input and output.
BPM: Sets the tempo of the device from which the Mod Gen divider will calculate from when in
sync mode.
Main Patch Inputs:
-
Freq: Connect to a frequency source, typically an MVC's freq output.
Gate: Connect to a gate source, typically an MVC's gate output.
-
-
Note: Connect to a note source for the filter keyboard tracking, typically an MVC's note
output.
-
Vel: Connect to a velocity source, typically an MVC's vel output.
Main Patch Outputs:
-
Esync: Connect to an MVC's e-sync input.
-
Synth Out: Polyphonic output of the synth. Notice that when outputting from this output,
you will need to include a poly out module within your patch in order to sum the voices. (If
you are outputting from the fx section, the voices are summed within the device and you
do not need a poly out module, since after the effects the device is monophonic).
Circuit Design: Yaron Eshkar
Gui Design: Fernando Abreu
Main Controls
http://www.oceanswift.net
https://www.facebook.com/oceanswiftsynthesis/
Credits:
Web:
Advertisement
