Download Print this page

Ocean Swift Synthesis OS20 Manual

Table of Contents

Download this manual

Ocean Swift Synthesis - OS20

The OS20 I/O

Patch inputs are designated by a red sleeve.

Patch modulation inputs are designated by a gold sleeve.

Patch outputs are designated by a silver sleeve.

Oscillator 1 Waveform: A choice between four waveforms: triangle, saw, pulse, white.

Oscillator 2 Waveform: A choice between four waveforms: saw, square, rect, ring.

Table of Contents

Do you have a question about the OS20 and is the answer not in the manual?

Page 1 Ocean Swift Synthesis - OS20 The OS20 I/O Patch inputs are designated by a red sleeve. Patch modulation inputs are designated by a gold sleeve. Patch outputs are designated by a silver sleeve. Controls Oscillator Section Oscillator 1 Waveform: A choice between four waveforms: triangle, saw, pulse, white.
Page 2 KBT: Bipolar midi note tracking modulation of the filters. At the center position no modulation is applied. Even when drone mode is set to note, the filters will still respond to midi notes (as long as the note input of the OS20 is connected to an MVC’s note output)
Page 3 Slope: Slope control for the decay and release portions of the envelope. Vel: Bipolar velocity control over the overall level of the envelope. Center position indicates no modulation. The OS20 Vel input needs to be connected to an MVC’s vel output in order for the envelopes to respond to velocity.
Page 4 Retrig: Retriggers the osc to start at the point specified by the phase knob with each new midi gate. Invert: Inverts the shape of the Saw/Tri output. Mod Gen Patch Outputs: Three LFO shape outputs: Saw/Tri, Pulse, Mix. The mixed output presents a mix of the saw/tri output with the pulse output.
Page 5 Sample and Hold: Sample and hold circuit with a signal input, modulation input and resulting output. Two sample and hold circuits are available on the OS20. Ring Mod: Ring modulator with inputs for two signals and an output for the result.