2.1.9 Removing the front board
(See Figs.10 to 12)
• Prior to performing the following procedures, remove the front
panel assembly.
(1) Remove the four screws L attaching the rear cover on the
back side of the front panel assembly. (See Fig.10.)
(2) Release the nine joints g, the front panel assembly and
rear cover become separate. (See Fig.11.)
(3) Remove the front board from the front panel assembly.
(See Fig.12.)
L
Joints g
nt g
ar cover
Front board
L
L
Rear cover
Fig.10
Front panel assem
Joint g
Joints g
Fig.11
Front panel assembly
Fig.12
(No.49846)1-7