What Can I Do If The Wlan Of The Terminal Is Not Encrypted And The Computer Cannot Access The Wlan; Configuration Page - Huawei HG552d User Manual

7.5 What can I do if the WLAN of the terminal is not
encrypted and the computer cannot access the WLAN?
Step 1 Delete the settings of wireless network connections from your computer.
Take a computer that runs Windows XP as an example. To delete the settings of wireless
network connections, do as follows:
1. In the Control Panel window, double-click Network Connections to display the
Network Connections window.
2. In the Network Connections window, right-click Wireless Network Connection
and choose Properties.
3. In the Wireless Network Connection Properties dialog box, click the Wireless
Networks tab.
4. In the Preferred Networks group box, select the latest wireless network connection
saved on your computer. Then click Remove.
5. Delete all the other wireless network connections from the Preferred Networks
group box.
6. Click OK.
Step 2
Create a wireless network connection that is not encrypted.
7.6 Is there any restriction on the number of the
computers that access a WLAN through wireless
network adapters?
Theoretically, the terminal supports hundreds of concurrent computers that access the
Internet through wireless network adapters. In practical applications, for the purposes of
the high performance of a wireless network, the number of the concurrent computers that
connect to the terminal should not exceed five.
7.7 What can I do if I cannot access the terminal

configuration page?

Step 1
See the answer to 7.2 "What can I do if I cannot visit Web sites through the terminal?"
and ensure that the power supply of the terminal works properly and that the telephone
lines and network cables of the terminal are properly connected.
Step 2
Check the IP address of your computer and ensure that this IP address is in the same
network segment as the LAN IP address of the terminal.
Step 3
Ensure that your Web browser does not use a proxy server.
Step 4
Ensure that you have entered the correct user name and user password that are used for
accessing the terminal configuration page.
Step 5
If the problem persists, restore the default settings of the terminal.
23
FAQs