Samsung Galaxy S4 User Manual page 162

Manually add your new network connection
1. From the Home screen, tap
Connections Wi-Fi.
2. Tap Add Wi-Fi network.
3. Enter the Network SSID. This is the name of your
Wireless Access Point.
4. Tap the Security field and select a security option. This
must match the current security setting on your target
WAP.
5. If secured, you will also need to enter your WAP's
password.
6. Tap Show advanced options, if you need to add
advanced options such as Proxy settings, IP settings,
or Key management.
7. Tap Connect to store the new information and connect
to your target WAP.
Note: The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the WAP key again, unless you reset
your device back to its factory default settings.
155
Turning Wi-Fi Off
Settings
Note: Use of wireless data connections such as Wi-Fi and
Manually Scan for a Wi-Fi Network
Wi-Fi Status Indicators
DRAFT
1. From the Home screen, tap
Connections Wi-Fi.
2. Tap the ON/OFF slider, located to the right of the Wi-Fi
field, to turn Wi-Fi OFF
Bluetooth can cause an added drain to your battery and
reduce your use times.
1. From the Home screen, tap
Connections Wi-Fi.
2. Tap Scan.
All available Wi-Fi networks are displayed.
The following icons show your Wi-Fi connection status at a
glance:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point
(WAP).
Settings
.
Settings