Table of Contents
Advertisement
•
When connected via Infrared, move the device away from the other
computer or device.
•
When connected via a network (Ethernet) card, remove the card from
your device.
•
When connected via a wireless network, switch off the connection.
Setting up a WAP gateway
device to use a WAP gateway. Use the following steps to create a new set
of connections to the Internet with WAP gateway settings.
NOTE
Some device models do not support the WAP sites viewing
feature.
1. Get the following information from your ISP: ISP server phone
number, user name, and password. Also, contact your mobile phone
service provider and ask for your WAP gateway server name and port
number.
> Settings > Connections tab > Connections.
3. Tap Edit my proxy server. If a proxy server has not been set up, tap
Set up my proxy server.
4. In Programs that automatically connect to the Internet should
connect using, tap New and enter a name for the ISP connection.
5. On the Proxy Settings tab, select This network connects to the
Internet and This network uses a proxy server to connect to the
Internet.
6. If necessary, in the Proxy server box, enter the proxy server name.
7. Tap Advanced > WAP.
8. In the Server box, enter the WAP gateway server name. Under Port,
9. Enter any logon credentials required by the WAP gateway server.
Using dialing rules
Additional numbers may need to be dialed depending on your given
location when connecting. For example, if you want to dial from work, a 9
72
Chapter 7
Advertisement
Table of Contents
