Advertisement
Adjustment method
Test instruments required for adjustment
1. Digital oscilloscope (100MHz)
2. AM Standard signal generator
3. FM Standard signal generator
4. Stereo modulator
5. Electric voltmeter
6. Digital tester
7. Tracking offset meter
8. Test Disc JVC :CTS-1000
9. Extension cable for check
EXTGS004-26P 1
Standard measuring conditions
Power supply voltage: DC14.4V(11V~16V allowance)
Load impedance:
Line-out Level/impeadance:
2.0V/20k
Output Impedance: 1k
How to connect the extension cable for adjusting
4
(4
to 8
allowance)
load(full scale)
Standard volume position
Balance and Bass &Treble volume : lndication"0"
Loudness : OFF
BBE
: NO BBE
Frequency Band
FM 87.5MHz ~ 107.9MHz
AM 530kHz ~ 1710 kHz
Dummy load
Exclusive dummy load should be used for AM,and FM. For
FM dummy load,there is a loss of 6dB between SSG output
and antenna input.The loss of 6dB need not be considered
since direct reading of figures are applied in this working
standard.
EXTGS004-26P
KD-S700GN/KD-S700BU
KD-S7250
1-11
Advertisement
