Advertisement
Rev. 0914
Installation Instructions:
Step 1: Level the forks of your fork truck. For instance,
place a bubble level on one of the tines and
adjust the pitch of the mast to make the tines
horizontally level.
Step 2: Remove the paper backing from the hook-and-
loop fastener strips on the level indicator (see
FIG. 2)
Step 3: Align the fork angle indicator with the mast angle
indicator as shown in FIG. 3.
Step 4: Attach the indicator base to the left side of the mast of your fork truck with the angle indicators facing the
cab/operator station (see FIGS. 4 & 5). Firmly press the indicator base against the mast to allow the
adhesive on the hook-and-loop fastener strips to bond to the mast.
Fig. 4: Mount indicator to left
side of mast
Operation:
When the tips of
the forks are
pointing down, the
red fork angle
indicator will be
below the yellow
mast angle
indicator.
Copyright 2014 Vestil Manufacturing Co.
Fig. 2
When the forks
are (horizontally)
level, the red and
yellow indicators
align.
FRK-LVL, MANUAL.doc
Fig. 3
Fig. 5: View from driver's
seat
When the tips of
the forks are
pointing up, the
red indicator will
be above the
yellow indicator.
Page 3 of 4
Advertisement
