Rev. 0914
Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the packaging
and maintains the orientation of the product in the packaging; then inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered during the inspection, immediately
record a complete description of the damage on the bill of lading. If the product is undamaged, discard the
packaging.
NOTES:
1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the
product is used is exclusively the responsibility of the owner/end-user.
2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either:
a) Instructions in this manual; or
b) information provided on labels affixed to the product.
Neither is Vestil responsible for any consequential damages sustained as a result of failing to exercise sound
judgment while assembling, installing, using or maintaining this product.
Table of Contents
Product specifications............................................................................................................................ 2
Hazard identification: explanation of signal words................................................................................... .... 2
Safe use recommendations................................................................................................................ .... 2
FIG.1: Exploded parts diagram and bill of materials................................................................................. .... 2
Installation instructions.......................................................................................................................... 3
Operation....................................................................................................................................... .... 3
Limited warranty.............................................................................................................................. ....4
Copyright 2014 Vestil Manufacturing Co.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
FRK-LVL F
ORK
A
SSEMBLY
V
M
ESTIL
ANUFACTURING
Fax: (260) 665-1339
www.vestilmfg.com
L
I
EVEL
NDICATOR
M
ANUAL
FRK-LVL, MANUAL.doc
C
ORP
e-mail:
s ales@vestil.com
H U
Page 1 of 4
.
U