Advertisement
Rev. 0914
Product Specifications:
Overall Dimensions (W x L x H)
1
1
2
/
x 9
/
x 5
4
4
(5.7cm x 23.5cm x 12.7cm)
Hazard Identification: Explanation of SIGNAL WORDS
This manual uses SIGNAL WORDS to indicate the likelihood of personal injuries, as well as the probable
seriousness of those injuries, if the product is misused in the ways described. Other signal words call attention to
uses of the product likely cause property damage.
The signal words used in this manual appear below along with the meaning of each word:
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS
INJURY. Use of this signal word is limited to the most extreme situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or
SERIOUS INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
Identifies practices likely to result in product/property damage, such as operation that might
damage the shed.
Safe Use Recommendations:
Vestil diligently strives to identify foreseeable hazards associated with the use of its products. However, no
manual can address every possible risk. The end-user ultimately is responsible for exercising sound judgment at
all times.
This product must be properly maintained to function properly.
Routinely examine the device and confirm that the indicator arm rotates freely. Lubricate the rivet whenever
necessary to restore free rotation.
Check the connection to the fork truck mast. The device should be solidly mounted to the mast. Replace the hoof-
and-loop strips if they are damaged.
Periodically check the accuracy of the indicator by performing step 1 on p. 3; then confirm that the fork angle
indicator aligns with the mast angle indicator. If necessary, pull the device off of the fork mast, adjust its position, and
reattach it to the fastener strips on the mast.
FIG. 1: Exploded parts diagram
3
6
1
4
Copyright 2014 Vestil Manufacturing Co.
Net Weight
1 lb.
(0.45kg)
Mast angle indicator
Fork angle
indicator
5
2
FRK-LVL, MANUAL.doc
Item
Part no.
Description
no.
1
47-016-013
Bracket, indicator
base, formed
2
47-014-015
Frame, Indicator arm,
formed
3
99-145-065
Solid rivet
4
99-117-010
Retainer,
5
33004
#12 SAE flat washer
6
47-051-001
1in. hook-and-loop
fastener strips, black,
pressure sensitive
Quantity
1
1
1
1
/
" push nut
2
4
1
4
Page 2 of 4
Advertisement
