Chapter 3: Configuration; Hardware Connection; Login - Abocom WR5205 User Manual

Chapter 3:
Configuration

Hardware Connection

1. Connect one end of the Ethernet cable to the LAN port of the Wireless Router, another end to your
PC or notebook.
2. There are two ways to connect to Internet (Only one way can be selected):
Connect Ethernet cable one end to the WAN port of the Wireless Router, the other end to the
ADSL or cable modem.
Or you can insert USB 3.5G card (that provide by your ISP) into USB port.
3. Finally, connect the Wireless Router with a power to an outlet.

Login

1. Start your computer and make sure the connection by an Ethernet cable between your computer
and the Wireless Router.
2. Start your Web Browser.
3. In the Address box, enter the IP address of the Wireless Router, as in this example, which uses the
Wireless Router's default IP address: http://192.168.1.1
6