Power On And Power Save Mode - Datawind SENIOR SIMPLE User Manual

Computer USB port.
• To charge your battery you first plug the mating end
of the cable into the USB port of the tablet, then the
other end of cable into the AC adapter.
• Once cable is securely plugged into both tablet and
AC Adapter, then only plug the AC adapter head into
a standard AC outlet.
• After charging is complete, unplug the charging head
from the power outlet and remove the USB cable
from the tablet.
Note: It is best to charge the device at room temperature.
It is not necessary to wait until the battery is completely
drained before recharging, you may charge at any time.
Also, the battery will maintain its lifespan longer if it is not
left uncharged for periods of more than 2 weeks at a time.

Power On and Power Save Mode

Press and hold "
the device. It can take up to a minute and half to boot the
system. After system boot is completed, it will enter
Android desktop. Start using the device.
You can turn off the screen to save power by shortly
pressing the power "
off. Repeat the process to reactivate the device.
" button for 3 seconds to power on
" button. The screen will turn
8