Advertisement
7-5 Select the item "No, I want to select the hardware from a list"
and click the "Next >" button.
7-6 Select the item "Other device" and click the "Next >" button.
7-7 Click the "Have Disk..." button.
7-8 Click the "Browse..." button to select the Inf file default path is
C:\DAQPRO\DIO_Win2K\Inf and click the "OK" button.
7-9 Select the correct device from the "Models:" listbox and Click
the "Next >" button.
7-10 The windows show to dialog box and Click the "OK" button to
enter the device's properties settings.
8. Modify the device properties.
3.
Select Interrupt Request
9. Reboot the PC
The detail "add hardware" information. Please refer to
CD:\NAPDOS\ISA\Manual\PCI_ISA_PnP_Driver_Installation_in_Win9x_2K_XP.pdf
http://ftp.icpdas.com/pub/cd/iocard/isa/napdos/isa/manual/pci_isa_pnp_driver_installation_in_win9x_2k_xp.pdf
1.
Select Input/Output Range
2.
Click "Change Setting" to
change I/O Range (Depend on
I/O Base Address)
No devices are conflicting
4. Click "Change Setting" to
change Interrupt Request.
(Depend on Interrupt Level
setting)
No devices are conflicting
- 4 -
Advertisement
