Loading And Playing A Cd; Programming A Cd; Playing The Am/Fm Radio; Programming Radio Station Presets - iLive IHCTB627CW User Manual

Loading and Playing a CD

1. Press the Open/Close button to open the CD tray.
2. Place a CD in the tray, label side facing up, and close the CD tray.
3. Set the Source to CD mode.
4. Use the controls on the unit to begin play, pause, stop and skip audio on the loaded disc.

Programming a CD

1. Press the Stop button to stop a loaded CD.
2. Press the Prog button on the remote. "01" will blink on the display.
3. Press the Skip Fwd/Rev buttons to select a track.
4. Press the Prog button to add the selected track to the program. Repeat this process to program up to 20 tracks
to play in a specified order.
5. Press the Stop button to cancel a program.

Playing the AM/FM Radio

Adjust the position of the antenna to improve AM/FM radio reception.
1. Set the Source to Tune mode.
2. Use the Tuning buttons to tune to a desired frequency band.

Programming Radio Station Presets

1. With the radio on, tune to a desired frequency and press & hold the Prog button on the remote or the unit.
Press the Tune+/- buttons on the remote to select a preset number. Up to 20 stations may be preset.
2.
3. Once you have selected the preset number you wish to program, press the Prog button again to save the
current station to that preset.

Playing a Cassette Tape

1. Set the Source to Tape.
2. Insert a cassette tape in the Cassette Door on the side of the unit.
3. Use the control button on the side of the unit to play, fast forward and eject the cassette.
Play
PLAY PLAY
F.FWD F.FWD
Fast Forward
F.FWD F.FWD
Eject
11