Air Cleaner - TRAC Daelim Hawk Olympic Clipper Service Manual

A I R C L EA N E R
DISASSEMBLY
left · side
11
Remove the
Loosen :the air cleaner band then remove the air cleaner.
•
•
Unscrew the 5mm screw then disassemble the air cleaner body.
CLEANING
•
Wash the element i n non-flammable or
high flash point solvent, and let it dry.
Clean the inside of case and wire mesh.
11
11
After dried, soak the element in gear
oil (SAE #80-90) and s q ueeze the
ASSEMBLY
• Assemble the wire mesh and element.
•
Tighten the band and check.
•
Make sure to coincide the direction of au entrance · opening with the running direction
the side cover.
3 -1
cover and un screw the 6mm bolt.
( 1} 6mm boh
(2f'Air
excess.
. . � .
deane1· band (3) :'>mm
screw
then install