Muting/Un-Muting The Headset Microphone; Restoring Factory Settings - Sennheiser VMX 100 3in1 Bedienungshandbuch

Muting/un-muting the headset microphone

To mute the headset microphone:
Press and hold the hook button
during a conversation until a beep is
heard in the headset.
The microphone is muted. A beep is
heard every 1.5 seconds in the head-
set.
To un-mute the headset microphone:
Press the hook button
press the volume button
The beeping stops. The microphone works as usual.

Restoring factory settings

You can restore the factory settings of
speaker volume and pairing as follows:
Set the headset to pairing mode as
described under "Pairing the head-
set to mobile phones or other Blue-
tooth devices" on page 16.
Press and hold the hook button
while the headset is in pairing
mode until the LED
ing.
´
The LED
that the headset is in the pairing mode. The headset
needs to be paired again before using.
·
´
flashes alternatingly in red and blue to indicate
or
¿
.
·
stops flash-
·
·
¿
´
23