How To Separate And Set The Dial Holding Ring And Solar Cell - Seiko V115A Technical Manual

TECHNICAL GUIDE
4 HOLDING RING FOR DIAL (0866 ***)
5 SOLAR CELL (4025 547)
The above 2 parts can be disassembled and re-assembled without
separating the parts.
Please refer to "How to separate the DIAL HOLDING RING and
SOLAR CELL.".
• How to remove
Release the pointed 4 hooking portioins
as shown in the right image from the main
plate with tweezers.
• How to install
Set the 2 guide pins to the DIAL and push
the 4 hooking portions. Make sure they
are properly set and hooked to the DIAL.
l How to separate and set the DIAL HOLDING RING and SOLAR CELL
• How to separate
Remove the 2 hooks of the DIAL HOLDING RING gently
as the SOLAR CELL is easily scratched.
• How to set
Set the 2 hooks of the DIAL HOLDING RING gently onto
the SOLAR CELL.
REMARKS:
* Be careful not to damage or scratch the SOLAR CELL as the generating performance could be declined
significantly with a scratch or damage.
* In case the performance of the SOLAR CELL does not satisfy the standard which is mentioned after checking
page 13 "Output of voltage for the solar cell unit." please replace the SOLAR CELL with a new one.
* In case a SOLAR CELL has become dirty, wipe the dirt of with an alcohol soaked chamois cloth so you
do not to damage it.
Hooks
Guide pin
Separate image
7/16
Cal. V115A
Hooks
Hooks