Table of Contents
Advertisement
Mode : You can select wireless LAN network mode – Infrastructure or Ad-hoc mode
Infrastructure Mode
This mode is used to set up a connection to a wired Ethernet network. This mode
requires an GOLDSTREAM Access Point to gain access to the wired network.
Ad Hoc Mode
This mode is used to set up a small, temporary network between two or more
computers. For example, you might set up an ad hoc network between computers in a
conference room so users can share information in a meeting.
SSID :
The Service Set Identifier (SSID) controls acces s to a given wireless network. This value
MUST match the SSID of any and all GoldStream Access Points that you want to communicate
with. If the value does not match, access to the system is not granted. The SSID can be up to 32
case-sensitive characters.
Tx Rate: The transmission rate at which the data packets are transmitted by the client
or AP. You can set this value to 1~2Mbps, 5.5Mbps, 11Mbps or Fully Automatic.
PS Mode: PS stands for Power Saving Mode. Currently, the PS mode does not
supported.
Afte r changing the setting in the Configuration change dialog box, click on Apply
Changes button. It takes a few seconds to set changes that you made.
Encryption - WEP
Page 26 of 39
LG GoldStream
Advertisement
Table of Contents
