Table of Contents
Advertisement
Seecode Tube User Manual
Usually, the caller's name and phone number will be displayed on the screen. However, some characters may be
illegible for some reason, for example, the name is in another language different from that Seecode Tube is using.
In that case, "?" will be displayed. If the phone number is not saved with the caller's name in your handset, only the
phone number will be displayed on the screen of Seecode Tube. In addition, if the phone numbers and callers'
names are saved in your handset with tags such as Work, House, and Mobile phone, characters /w, /h, and /m will
be displayed on the screen of Seecode Tube after the callers' names.
Note:
Phonebooks of more than one handset may be saved in Seecode Tube. If Seecode Tube is in standby mode
(disconnected), press and hold button
for 3 seconds to display the phonebook downloaded just last time. If
Seecode Tube is connected, it displays the phonebook of the handset which is being connected with it.
Call history records
You can also use the menu to display both the incoming call records and the outgoing call records. For details, refer
to section 2.4.1. If no call record is found, the message "No Record!" will be displayed on the screen.
In either the phonebook records or the call history records, press button
or
to scroll up or down the records.
When Seecode Tube is in connected mode, you can press button
to dial the number you select in the phonebook.
For a call history record, you can press button
to see the details of the record and press button
again to dial the
number. When the number is dialed, you will hear the voice prompt "Calling <Number>".
3.3 Exit Phonebook
When you are browsing phonebook/call history records or the details of a record, you can press button
to return
to standby mode. When you are browsing the details of a record, you can press button
to return to the last level
of menu and press button
again to return to the standby mode.
3.4 Delete Phonebook/Call History Records
To delete all the phonebook records, press
to enter the main menu, select
, and then select Erase.
To delete all the call history records, press
to enter the main menu, select
, select Incoming / Outgoing, and
then select Erase.
.
20
Advertisement
Table of Contents
Need help?
Do you have a question about the Tube and is the answer not in the manual?
Questions and answers