Hookups With A Cable Box/Direct Broadcast System - Philips VRA671AT Owner's Manual

Hookups With a Cable Box/Direct Broadcast System (cont'd) 9
With this connection:
You may watch one channel while recording another.
You may not record scrambled channels.
1
VCR
AUDIO ANT
IN
L
OUT IN
R
VIDEO
OUT
CH3 CH4
IN
OUT
Cable
Signal
Connections
1
Connect a Cable signal to the VCR's ANT(enna) IN Jack.
2
Use an RF coaxial cable (supplied) to connect the OUT Jack on
the VCR to the IN Jack on the Cable Box/DBS.
3
Use a second RF coaxial cable to connect the OUT Jack on the
Cable Box/DBS to the ANTENNA IN Jack on the TV.
Recording One Channel/Watching Another
1
Put the Cable Box/DBS on the same channel as the
VCR's CH3/CH4 switch. Set the TV to the Cable
Box/DBS output channel (03 or 04).
Then, with the VCR in VCR position (the VCR light will appear
on the display panel), use the CH(annel) o/p button to
select the channel you want to record at the VCR. Start
the recording.
2
Press the VCR/TV button once to put the VCR in TV
position. (The VCR light will disappear.)
3
Select the channel you want to watch at the Cable
Box/DBS.
2
Cable Box/DBS
IN
RF coaxial
cable
O U T
RF coaxial
cable
• When you play a tape, make sure
the Cable Box/DBS is set to the
same channel as the CH3/CH4
switch on the VCR. Set the TV to
the Cable Box/DBS output channel
(03 or 04).
7 5
A N T
/
C A B
L E
3
TV's ANTENNA
IN Jack
Helpful Hint